OS FS40 stuck exhaust valve

Glow/Nitro and gas engines, propellers, fuel and other stuff associated with making lots of noise and thrust.

OS FS40 stuck exhaust valve

Postby hohocc » Sun Nov 11, 2012 7:09 am

I'm in the process of freeing up my very old and gummed up OS 40FS, it's got an exhaust valve which is stuck open, appears the problem lays with the pushrod/tappet as the rocker arm does not move when the engine is turned. As a first line of assault I've filled the top of the head around the rockers and valve springs with CRC to see if it might soak in and help a bit. Tried to remove the cam cover plate but while I can turn it easily it seems to need some force applied to get it to pop out which I'm reluctant to do.
Other ideas I've had are warming the tappet area with a heat gun or (carefully) with a butane torch, or boiling the whole engine in water (as worked well with the carb) and then running it immediately after to make sure it dries out. Neither of these ideas really appeal so I'm after any ideas!
Thanks.
hohocc
 
Posts: 36
Joined: Tue Oct 09, 2012 8:39 am

Re: OS FS40 stuck exhaust valve

Postby AshleyB32 » Sun Nov 11, 2012 10:50 am

if you used castor oil in the engine previously boil it in water and get it apart if your worried about being able to dry it after you can always heat the oven up to like 150 and turn it off chuck the engine parts in there and let it dry out, ive done it b4 with model engines 2 & 3 stroke, give it a good oil after your finished and you should be good to go
AshleyB32
 
Posts: 20
Joined: Mon Aug 13, 2012 1:49 pm
Location: Warrnambool Vic, Australia


Return to IC Engines

Who is online

Users browsing this forum: No registered users and 1 guest

cron