BD5 Electric engine

If you've got a problem then you can ask here and either I or others will likely come to your rescue.

BD5 Electric engine

Postby McHannemann » Wed Jul 13, 2011 2:12 pm

Hello Everyone,

I have some questions regarding the BD5 Balsa 1105mm
http://www.hobbyking.com/hobbyking/stor ... duct=17137
I have turnigy 8 Channel reciever for it.

1) What would be the right motor and ESC combo?

2) Would it be wise to make it flaperon with 2 servos or cut flaps into the wings with 4 servos plus the elevon servo?

Thanks for the help
Thor
McHannemann
 
Posts: 8
Joined: Mon Jun 27, 2011 1:39 pm

Re: BD5 Electric engine

Postby McHannemann » Fri Jul 15, 2011 1:33 pm

I'm not aiming to make areobatics with it, I am looking for a stable motor/esc/propeller/battery combination which gives me the longest possible flying time
McHannemann
 
Posts: 8
Joined: Mon Jun 27, 2011 1:39 pm

Re: BD5 Electric engine

Postby McHannemann » Mon Jul 18, 2011 10:16 am

I would appreciate some help with it :)
McHannemann
 
Posts: 8
Joined: Mon Jun 27, 2011 1:39 pm

Re: BD5 Electric engine

Postby McHannemann » Tue Aug 09, 2011 8:46 pm

Sorry for the late reply,
these are the details I have for the plane:
Wing Span 43.5"
Wing Area 230 Sq. In.
Length 31"
Weight 25 TO 28 Ounces
suggested propeller 7-5” APC-E propeller
can only fit the inrunner brushless with diameter of no more than 28mm
I'm looking forward to your help :)
McHannemann
 
Posts: 8
Joined: Mon Jun 27, 2011 1:39 pm


Return to Help Needed

Who is online

Users browsing this forum: No registered users and 1 guest

cron