Optic 6 - Gyro switch Howto

Helicopter-specific issues relating to the electronics in your bird

Optic 6 - Gyro switch Howto

Postby takilara » Thu May 20, 2010 10:26 pm

This post is a shorter version of a post i put at helifreak and heliguy, i thought maybe it could help someone:

The Optic 6 manual states that the gyro channel has to be attached to a flight mode. At the same time, the manual also describes SW-2 as Gyro switch, but does not explain how to configure this.

Some googling and fiddling around gave me this approach to do this:
  1. Disable gyro in Tx (Inh)
  2. Maybe reverse channel 5
  3. Change EPA for channel 5, both switch positions (i started with 50 for each, and worked from there)

I ended up with the following:
  1. GYRO: Inh
  2. REV: Ch 5: N
  3. EPA: Ch 5, L/U: 30
  4. EPA: Ch 5, R/D: 70

Well, I hope this is useful for someone.
The price of getting what you want;
is getting what you once wanted...
_____
T-REX 600 ESP
CopterX 450AE V2
Multiplex FunCub
Belt-CP
User avatar
takilara
 
Posts: 144
Joined: Mon May 17, 2010 7:53 am
Location: Stavanger - Norway

Return to Radios, Gyros, Servos

Who is online

Users browsing this forum: No registered users and 2 guests

cron