Turnigy 9X failsafe question

Problems, experiences or just something to say about RC gear? Say it here.

Turnigy 9X failsafe question

Postby glenncol55 » Fri Oct 14, 2011 1:08 am

Hi all

I have a question about the Turnigy 9x radio, currently under failsafe all my settings are set to NOR, does this mean that Failsafe is not active? or is it active with a predetermined setting?
glenncol55
 
Posts: 9
Joined: Tue Jan 18, 2011 2:28 am

Re: Turnigy 9X failsafe question

Postby RCModelReviews » Fri Oct 14, 2011 2:28 am

The standard 9X radio has no failsafe abilities.

Although there is a failsafe setting in the radio menu, it only works in the old version when running the FlySky PCM (longwire - 35/72MHz) module and receivers.

If you want failsafe in a 9X you have to change the RF to the FrSky (or some other) 2.4GHz system.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Turnigy 9X failsafe question

Postby glenncol55 » Fri Oct 14, 2011 4:42 am

RCModelReviews wrote:The standard 9X radio has no failsafe abilities.

Although there is a failsafe setting in the radio menu, it only works in the old version when running the FlySky PCM (longwire - 35/72MHz) module and receivers.

If you want failsafe in a 9X you have to change the RF to the FrSky (or some other) 2.4GHz system.



Thanks Bruce

Cheers
glenncol55
 
Posts: 9
Joined: Tue Jan 18, 2011 2:28 am


Return to Radios and Servos

Who is online

Users browsing this forum: No registered users and 1 guest