Turnigy 9X with OLED display

Problems, experiences or just something to say about RC gear? Say it here.

Turnigy 9X with OLED display

Postby glenncol » Wed Feb 22, 2012 6:44 am

Hell all

I noticed on the attached link someone has fitted a .96" OLED display with an unknown (Too me anyway) transmitter displaying Frsky Telemetry information.

http://www.youtube.com/watch?v=tthS4OP3lEA

Does anyone know what needs to be done to do this, i think its way cool and would suite the 9X variants down the ground

In Bruce's latest video he mentioned a company Statistronics who carry the OLED display
http://www.satistronics.com/096-128x64- ... p2871.html
glenncol
 
Posts: 8
Joined: Tue Jan 24, 2012 2:49 am

Re: Turnigy 9X with OLED display

Postby glenncol » Wed Feb 22, 2012 10:01 pm

Anyone?
glenncol
 
Posts: 8
Joined: Tue Jan 24, 2012 2:49 am

Re: Turnigy 9X with OLED display

Postby RCModelReviews » Thu Feb 23, 2012 3:03 am

You need to have a microcontroller interface between the OLED display and the telemetry data coming out of the FrSky module or DIY. This is what I designed with the RCModelReviews telemetry dashboard but I used an LCD rather than an OLED (bigger, easier to read).
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Turnigy 9X with OLED display

Postby glenncol » Thu Feb 23, 2012 10:57 pm

RCModelReviews wrote:You need to have a microcontroller interface between the OLED display and the telemetry data coming out of the FrSky module or DIY. This is what I designed with the RCModelReviews telemetry dashboard but I used an LCD rather than an OLED (bigger, easier to read).


Hi Bruce thanks for the response mate.

Is the dashboard ready made? easy too make?, sorry do you have a link?
glenncol
 
Posts: 8
Joined: Tue Jan 24, 2012 2:49 am

Re: Turnigy 9X with OLED display

Postby kaptain_zero » Thu Feb 23, 2012 11:21 pm

You can get a telemetry display from FrSky: http://goo.gl/TeB0k

You can also get the display w/transmitter built in that just mounts on your radio: http://goo.gl/XsOv1

And finally, if you are using a 9x radio, you can always add the FrSky 2 way hack module or the plug in JR module and then do a bit of modding and install ER9X software and have all your telemetry displayed on the radio's own screen. More info at: http://goo.gl/2Q2mz


Regards

Christian
"I'd like to live as a poor man with lots of money."
-- Pablo Picasso
User avatar
kaptain_zero
 
Posts: 197
Joined: Wed Mar 23, 2011 2:50 am
Location: Winnipeg, Canada

Re: Turnigy 9X with OLED display

Postby glenncol » Fri Feb 24, 2012 7:51 am

Hey Christian

I have the Flysky version of the 9X with the Frsky DJT module plugged in that has Telemetry , i assume by flashing the firmware to the ER9X will do the job

What modding needs too be done?
glenncol
 
Posts: 8
Joined: Tue Jan 24, 2012 2:49 am

Re: Turnigy 9X with OLED display

Postby kaptain_zero » Sat Feb 25, 2012 1:12 am

Head over to 9xforums.com where you'll find all the information you would need. A quick link to the details of the hardware mod (you need to get the information into the radio from the module, then you'll need to flash to the telemetry specific version of er9x) can be found here.

Regards

Christian
"I'd like to live as a poor man with lots of money."
-- Pablo Picasso
User avatar
kaptain_zero
 
Posts: 197
Joined: Wed Mar 23, 2011 2:50 am
Location: Winnipeg, Canada


Return to Radios and Servos

Who is online

Users browsing this forum: No registered users and 5 guests

cron