Turnigy 9X with FMS usb cable

Problems, experiences or just something to say about RC gear? Say it here.

Turnigy 9X with FMS usb cable

Postby ThePoeko » Sat Jul 10, 2010 10:56 pm

Has anyone been able to setup a 9X for use with a simulator via an USB FMS cable? I have 2 FMS USB cables one is stereo, the other mono. I've tried both cables with Vista, Windows7 and XP. Both cables on all 3 operating systems are detected right away, but when I move the controls on the radio, there is no response whatsoever.

If these cables do not work with the 9X, has anyone had any luck using a pass through audio cable connected to an audio card?

I'd much prefer to use the radio I fly with for simulators rather than one of the dedicated usb 'radios' you can purchase.

Any advice would be greatly appreciated!
ThePoeko
 
Posts: 8
Joined: Tue Jun 29, 2010 12:12 am

Re: Turnigy 9X with FMS usb cable

Postby ThePoeko » Sun Jul 11, 2010 3:59 am

Problem Solved!

Removing the module solved the problem. Is this normal for all radios or is it just an issue with the Turnigy 9X?
ThePoeko
 
Posts: 8
Joined: Tue Jun 29, 2010 12:12 am

Re: Turnigy 9X with FMS usb cable

Postby rwsams » Wed Jul 21, 2010 12:04 am

I'd really like to find out which cable you got to work and where I can get one!
Thanks in advance.
rwsams
 
Posts: 5
Joined: Thu Jun 24, 2010 6:41 pm

Re: Turnigy 9X with FMS usb cable

Postby ThePoeko » Wed Jul 21, 2010 2:52 am

This is the one I purchased:

http://www.amazon.com/USB-Flight-Sim-Mo ... pd_sim_t_4

There are plenty of other options available but I know this one works with the 9X.
ThePoeko
 
Posts: 8
Joined: Tue Jun 29, 2010 12:12 am

Re: Turnigy 9X with FMS usb cable

Postby rwsams » Thu Jul 22, 2010 10:40 pm

Thanks, Poeko. I'll post my results after I get one.
rwsams
 
Posts: 5
Joined: Thu Jun 24, 2010 6:41 pm

Re: Turnigy 9X with FMS usb cable

Postby JBC » Sat Jul 31, 2010 2:43 am

I have used the USB simulator cable that came with my Art-tech RTF SU-27 and it works fine on FMS. Also bought a USB cable on ebay and used it with my uncles 9X without any issues. both of us use Corona DSSS V2 modules and have them plugged in when the tx is connected to the PC. I don't think what module you have makes a difference, and I also use Vista.

John
Helping the glue industry, one crash at a time.....
User avatar
JBC
 
Posts: 75
Joined: Mon Jul 26, 2010 1:56 am
Location: Adelaide, Australia

Re: Turnigy 9X with FMS usb cable

Postby rdhood » Tue Aug 10, 2010 5:03 pm

ThePoeko wrote:If these cables do not work with the 9X, has anyone had any luck using a pass through audio cable connected to an audio card?



I have it working with a stereo miniplug to a microphone plugin on my HP notebook:

viewtopic.php?f=6&t=183&p=2538#p2538
rdhood
 
Posts: 13
Joined: Sun Jul 18, 2010 12:45 pm


Return to Radios and Servos

Who is online

Users browsing this forum: No registered users and 2 guests

cron