TX firmware
5 posts
• Page 1 of 1
TX firmware
by Barnstormer » Wed Oct 16, 2013 12:03 pm
Hi guys anybody know if its possible to upload the Taranis firmware onto a Kingmax/KST T810 Tx?....
- Barnstormer
- Posts: 2
- Joined: Wed Aug 01, 2012 3:47 pm
Re: TX firmware
by BillGriffiths100 » Wed Oct 16, 2013 2:46 pm
Unless it's an exact clone of Taranis, including all connections and processor no.
Compromising with out of control government is like living with a lion, sooner or later the bloody thing will eat you .
You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
-
BillGriffiths100 - Posts: 553
- Joined: Mon Sep 20, 2010 2:04 pm
- Location: London UK
Re: TX firmware
by Barnstormer » Thu Oct 17, 2013 11:03 am
Thanks Bill....not 100% but the Taranis may be a clone of the Kingmax/KST radio as the Kingmax was available before Taranis appeared
- Barnstormer
- Posts: 2
- Joined: Wed Aug 01, 2012 3:47 pm
Re: TX firmware
by cynr100 » Fri Oct 18, 2013 1:30 am
Kingmax has been around for some time, it and the Taranis share the same or very similar external shell as the Futaba from years past. Some POTs and switches differ in position, it would require a deep pocket to trial without knowing the internal differences.
Not sure you could even install Er9X firmware to the Kingmax. You might want to have a search through here.......
http://openrcforums.com/forum/viewforum.php?f=5
Not sure you could even install Er9X firmware to the Kingmax. You might want to have a search through here.......
http://openrcforums.com/forum/viewforum.php?f=5
Not enough time in the day for all my crazy ideas, I'm not slow, I'm just pacing myself
-
cynr100 - Posts: 821
- Joined: Wed Jan 25, 2012 7:37 am
- Location: Cairns, Australia
Re: TX firmware
by BillGriffiths100 » Fri Oct 18, 2013 7:59 am
The Taranis is based on the 9x layout but the processor is an ARM processor not the Atmel used in the 9x so it's very unlikely that the firmware would be compatible. The resemblance is only skin deep.
Compromising with out of control government is like living with a lion, sooner or later the bloody thing will eat you .
You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
-
BillGriffiths100 - Posts: 553
- Joined: Mon Sep 20, 2010 2:04 pm
- Location: London UK
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 19 guests