Ferrite rings & 2.4ghz JR DMSS!

Nicad, NiMH, Lithium, A123? If it's transmitter or receiver batteries you want to talk about, do it in this forum.

Ferrite rings & 2.4ghz JR DMSS!

Postby ChrisTTsport40 » Mon Nov 19, 2012 7:39 pm

Hi!
Does anyone know if the ferrite ring to servo cable near to RX RG831B create problem to the range?
ChrisTTsport40
 
Posts: 13
Joined: Mon Jun 13, 2011 3:01 pm

Re: Ferrite rings & 2.4ghz JR DMSS!

Postby zann68 » Wed Nov 21, 2012 1:31 am

Would not think so. Ferrites are used to clean noise out of electronics. Don't see how it would effect the RX signal.
Calm down!! Gravity has been checked, and it's still working
User avatar
zann68
 
Posts: 58
Joined: Fri Mar 16, 2012 9:29 pm
Location: New Brockton, Alabama

Re: Ferrite rings & 2.4ghz JR DMSS!

Postby ergocentric » Wed Nov 21, 2012 5:44 am

zann68 wrote:Would not think so. Ferrites are used to clean noise out of electronics. Don't see how it would effect the RX signal.


Noise just like servo PWM signals, your servo may suffer, Optoisolator is the way to go.
unconcerned but not indifferent - MAN RAY
User avatar
ergocentric
 
Posts: 350
Joined: Sat Jun 05, 2010 9:45 pm
Location: small town, Ontario, Canada

Re: Ferrite rings & 2.4ghz JR DMSS!

Postby ChrisTTsport40 » Wed Nov 21, 2012 12:37 pm

I put the ferrite ring in the servo extension rear of the RX!
I ask because the MAnufacture say no metal or carbon near of the receiver!
And the ferrite ring is made of metal and charcoal i think!
ChrisTTsport40
 
Posts: 13
Joined: Mon Jun 13, 2011 3:01 pm


Return to Receiver/transmitter Batteries

Who is online

Users browsing this forum: No registered users and 7 guests

cron