Page 1 of 1
frsky problem
Posted:
Wed Nov 17, 2010 6:30 pmby dannyzz
hi there
i just converted my very old futaba magnum junior pistol grip controller to 2.4 sucessfully but when ever i turn it on the servo "twithches" very slightly where i and am there is not a crowded 2.4ghz area any ideas ?
Re: frsky problem
Posted:
Thu Nov 18, 2010 4:51 amby dannyzz
opened up the controller and it seems when the aerial lead gets close to the main circuit board it starts twitching is ther any thing to put over the aerial wire to stop it ?
Re: frsky problem
Posted:
Thu Nov 18, 2010 7:52 amby RCModelReviews
It is not uncommon for logic circuits to pick up the RF signal (or noise from the regulator on the board) and create those kind of problems.
Try to mount the DIY board as far away from the main board as possible and likewise, ensure the antenna wire is as far away as possible.
Re: frsky problem
Posted:
Thu Nov 18, 2010 8:08 amby dannyzz
tried that too it right out still does it and it only does it on the throttle channel
Re: frsky problem
Posted:
Sat Nov 20, 2010 6:53 amby kneedrag
What servo's are your running Digital or analog?
Re: frsky problem
Posted:
Sun Nov 21, 2010 2:22 amby dannyzz
analog