PROPER 2.4GHZ RECEIVER INSTALLATION

If you want to see a product reviewed on RCModelReviews, make your suggestion here and, if there's enough interest, I'll see what I can do.

PROPER 2.4GHZ RECEIVER INSTALLATION

Postby AshleyB32 » Fri Jan 18, 2013 4:33 am

with alot of people going from there old systems to the newer 2.4ghz systems these days would be good to know the proper install for the 2.4ghz receivers, just an idea
AshleyB32
 
Posts: 20
Joined: Mon Aug 13, 2012 1:49 pm
Location: Warrnambool Vic, Australia

Re: PROPER 2.4GHZ RECEIVER INSTALLATION

Postby quarry44 » Fri Jan 18, 2013 8:51 pm

With most 2-wire aerials,they should be at 90 degrees to each other.Single wire no problems.Put it where it's convenient.
I mount my receivers on velcro patches attached to the fuse bottom(inside,of course) or side.
Common sense suggests to keep rx away from esc if possible,but in my AXN,the rx (Frsky)is virtually on top of the esc,and has not given any problems.
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am


Return to Suggest a review

Who is online

Users browsing this forum: No registered users and 1 guest