2.4 TX/Rx field tests?

If you want to see a product reviewed on RCModelReviews, make your suggestion here and, if there's enough interest, I'll see what I can do.

2.4 TX/Rx field tests?

Postby Barbosa2 » Sun May 22, 2011 1:24 pm

Hi Bruce,

You've done a lot of great 'lab' tests and have a great deal of 'static' documentation. But how difficult would it be to actually field test with other pilots creating a lot of interference? You may not even have to fly a thing. Just have a bunch of pilots and anchored planes (or planes with no props) near you moving all the servos while you test? You could even be in a car while a buddy drives you up and down the runway while you test the Rx.

ETA: If static planes aren't enough and you need loads produced from the tx to rx, you could get as many pilots that would be kind enough to participate and fly a simple circle pattern while you drive around the field.
The more interference you can generate, the better the test results, I would think. Would it work?
Barbosa2
 
Posts: 9
Joined: Wed May 18, 2011 7:35 pm

Return to Suggest a review

Who is online

Users browsing this forum: No registered users and 2 guests