HOW TO USE A POWER ANALYZER (HELP)

Here's an area where you can ask any kind of question about RC models and find a whole lot of useful information to help you get started.

HOW TO USE A POWER ANALYZER (HELP)

Postby Ziet » Tue Sep 04, 2012 10:02 am

I am new to electrics but not RC. I understand how to use the lipo checker and balance etc. But I don't understand the information about WATTs... mAH and how this relates to my power setup.
That is I have connected the power analyzer to the speed controller and the lipo run the motor and I get a set of readings. Then what to do with these figures!!!! (I'm not technically minded as you will have gathered)
I look very professional but I don't have clue as to whats going on or what to do next.!!!!!!!!!!!!!!!please :cry: help before I explode into flames....
Ziet
 
Posts: 2
Joined: Tue Sep 04, 2012 9:45 am

Re: HOW TO USE A POWER ANALYZER (HELP)

Postby Flash1940 » Tue Sep 04, 2012 1:33 pm

Here is something that will help http://www.rcuniverse.com/magazine/article_display.cfm?article_id=468
Maybe you could download the user manual.....it's a good read... Get the user manual here http://www.rc-cars-planes.com/rc-downloads.html
Flash
User avatar
Flash1940
 
Posts: 97
Joined: Sat Sep 04, 2010 2:48 pm
Location: Paris, Kentucky.....Central Kentucky USA

Re: HOW TO USE A POWER ANALYZER (HELP)

Postby Ziet » Wed Sep 05, 2012 7:45 am

Many thanks for the inf.
Ziet
 
Posts: 2
Joined: Tue Sep 04, 2012 9:45 am


Return to For Beginners (if you're just getting started in RC)

Who is online

Users browsing this forum: No registered users and 2 guests

cron