Now at this stage you should be getting closer to almost flying but before you do make sure that the 9x sticks are controlling the ailerons, rudder, throttle and elevator as they should be. Placing your model on the ground and standing behind it move your sticks to see if everything is good (careful with the throttle). If you find that you turn the rudder to the left only to see it go to the right on the plane don't panic.
Press MENU to bring up this screen
- DSC_0005.JPG (246.12 KiB) Viewed 15165 times
Using UP / DN highlight the spanner and screwdriver icon
That will bring up this screen
- DSC_0017.JPG (194.95 KiB) Viewed 15165 times
And we want the first one highlighted which is REVERSE.
Press MENU to bring up this screen
- DSC_0018.JPG (188.82 KiB) Viewed 15165 times
Using UP / DN move up or down the list to select the channel you need to reverse. Once selected press the +/- to reverse it. And don't forget to press MENU once to save and exit.
CAUTION: NEVER PLAY AROUND WITH THIS SCREEN WHILE FLYING
CAUTION: Although it has abbreviations like AIL / ELE and THR be very careful when reversing a channel as you may reverse the THROTTLE channel which makes the plane motor suddenly power up (move throttle stick up to take the power off - remember this when reversing it back to normal)
Thats all you need to do with the 9x to get the AXN up into the air.
Do you need assistance with the receiver in the AXN?