Bruce's Tool channel

Here's an area where you can ask any kind of question about RC models and find a whole lot of useful information to help you get started.

Bruce's Tool channel

Postby rcflyer55 » Thu Feb 27, 2014 8:50 pm

Bruce was suppose to review and give how too on tools. Other then XJet does he have another you tube channel where he is doing videos on tools.
Posts: 3
Joined: Sun May 23, 2010 9:52 pm

Re: Bruce's Tool channel

Postby Rajah45523 » Fri Feb 28, 2014 1:14 pm

Hi rcflyer55,
No. Bruce does not have another channel that he uses to review or do "How-to's" on tools etc. (AFAIK)
You may be referring to the one on his old lathe...posted on Aug 27, 2013.

Bruce has been rather busy with a "few" projects & is waiting for a positive, (hopefully), reply from the CAA, re; gaining an exception
that will allow him to fly at the airfield & continue testing his Sense & Avoid system & "other stuff."

Plus, he also has a lot of videos to shoot & edit etc, & these take time.

You could try emailing him?
Contact addy is on his rcmodelreviews site under the "Feedback" link.

Hope this helps a tad.
Posts: 8
Joined: Sun Apr 21, 2013 3:19 pm

Re: Bruce's Tool channel

Postby Aussie Joe » Fri Feb 28, 2014 1:22 pm

Bruce's channels

The tool video is number #642 (just after the HK turbine flight) on his to-do list so you could be waiting a long while :roll:
"Photonicinduction" One man and a plug socket = Mayhem.
Aussie Joe
Posts: 48
Joined: Sat Oct 15, 2011 12:54 am

Re: Bruce's Tool channel

Postby rcflyer55 » Sat Mar 01, 2014 6:16 pm

The interesting projects channel was what I was looking for. Thanks for the replies..
Posts: 3
Joined: Sun May 23, 2010 9:52 pm

Return to For Beginners (if you're just getting started in RC)

Who is online

Users browsing this forum: No registered users and 1 guest