RC Model Reviews

Hi Bruce, love all the videos and the helpful information. Just bought a EDF jet but I need to get hold of a 2.4 GHz nano receiver and a transmitter to match but I am finding it really hard to get hold of one! Got any ideas?

Do you have a link to a nano receiver and someone is probably able to figure out a compatible transmitter?

No sorry, I've lookeed around, I'm really kind of hoping other people have links that can help :S

So you haven't purchased either of receiver or transmitter yet? But the set needs to include a very small receiver?
/Håkan

Yeah , sorry im quite new to rc and was quite annoyed to find taht my plane didnt come with transmitter and receiver just need a little help getting off the ground :L

How nano exactly ?
Hobbyking has the SuperMicro series, they are tiny. http://www.hobbyking.com/hobbyking/stor ... Micro.html

This is the model I have ( http://www.bananahobby.com/2157.html ) so it needs to fit inside the cockpit, there is barely any room after I have the battery in so really quite small.

Check if one of these from FrSky fits in:
The regular 4channel reciever, size 34.5x19.5x8mm.
The micro 4channel, size 21x16x5.8mm

If these fit, I suggest you get a Turnigy 9X, and upgrade it to the FrSky, with either telemetry or not.
http://www.hobbyking.com/hobbyking/store/__8991__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_1_v2_Firmware_.html
http://www.hobbyking.com/hobbyking/store/__8992__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_2_v2_Firmware_.html

http://www.hobbyking.com/hobbyking/store/uh_listCategoriesAndProducts.asp?idCategory=402&v=&sortlist=P

For more info about the Turnigy 9X, FrSky, telemetry and such, read the forums

Another alternative would be to purchase a Spektrum DX6i (I have 3 of them and love them everyone) and the Orange 6 channel receiver: http://www.hobbyking.com/hobbyking/stor ... Port_.html
pull out the receiver from the box and it will fit into the canopy.

/Håkan

Only problem with that Hakan is that the cables are all nano size attatchments, and thanks for the advice will look over each option