Prevew: Turnigy 9X version 2

Discussion on the reviews of 2.4GHz radios, modules and receivers that have appeared on RCModelReviews..com

Re: Prevew: Turnigy 9X version 2

Postby Andrej » Wed Jun 30, 2010 6:57 pm

RCModelReviews wrote:You could always fit one of those stability systems (either infra-red or gyro-based). They'll allow you to just focus on direction an height without worrying about keeping the heli in the air, if you lose your video link.

True! But they're quite pricy...

RCModelReviews wrote:There's a review on the RCModelReviews.com website. The FrSky came first-equal with the Hitec in my 2.4GHz shootout.

Nice review!
1Km range on the ground is pretty darn far, that should probably go like 3Km at 200 - 300m altitude... :)
Andrej
 
Posts: 8
Joined: Tue Jun 15, 2010 3:05 pm

Re: Prevew: Turnigy 9X version 2

Postby RCModelReviews » Wed Jun 30, 2010 8:28 pm

Andrej wrote:1Km range on the ground is pretty darn far, that should probably go like 3Km at 200 - 300m altitude... :)

The FrSky has been tested (by others) at ranges of up to 5Kms without any problems.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Prevew: Turnigy 9X version 2

Postby jet760 » Wed Jun 30, 2010 11:27 pm

Hi Bruce whens your next video coming up?
jet760
 
Posts: 59
Joined: Mon May 31, 2010 12:36 pm

Re: Prevew: Turnigy 9X version 2

Postby RCModelReviews » Thu Jul 01, 2010 4:25 am

jet760 wrote:Hi Bruce whens your next video coming up?

I'm editing one up now. Should be online tomorrow I hope.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Prevew: Turnigy 9X version 2

Postby RaWe » Thu Jul 01, 2010 11:29 am

Hello,

Will the FrSky system be compatible with Turnigy V2 9X?

Thanks!
RaWe
 
Posts: 4
Joined: Mon Jun 28, 2010 12:05 pm

Re: Prevew: Turnigy 9X version 2

Postby RCModelReviews » Thu Jul 01, 2010 9:45 pm

RaWe wrote:Hello,

Will the FrSky system be compatible with Turnigy V2 9X?

Thanks!

If you cut the cable that ties the original module to the transmitter and remove the built-in antenna then you can simply plug in a standard FrSky module as before and use FrSky receivers.

What I'll be working on is a project that allows you to use the built-in antenna with your FrSky system.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Prevew: Turnigy 9X version 2

Postby RaWe » Fri Jul 02, 2010 7:41 am

Thanks for the reply...

What I'm really trying to find out is,..that among all the variations of this radio, is there one that requires mininum or no hacking (for NOOBs like me :roll: ) to be used with good quality products like Frsky, Assan or equivalent.

Cheers!

RaWe
RaWe
 
Posts: 4
Joined: Mon Jun 28, 2010 12:05 pm

Re: Prevew: Turnigy 9X version 2

Postby RCModelReviews » Fri Jul 02, 2010 9:02 am

The V1 is a simple module-swap. Pull out the FlySky module, plug in the FrSky/Assan/whatever module of your choice.

The Turnigy V2 radio has slightly modified software to address some bugs in the standard FlySky V1 system though -- so it's probably better to go with the V2 (which is generally cheaper with the Turnigy branding) and follow the instructions I'll be publishing in a week or two.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Prevew: Turnigy 9X version 2

Postby RaWe » Fri Jul 02, 2010 9:59 am

Hi again,

I will go with your suggestion with the Turnigy V2 and hope that I will be able to follow and successfully implement the modifications in your future instructions...
RaWe
 
Posts: 4
Joined: Mon Jun 28, 2010 12:05 pm

Re: Prevew: Turnigy 9X version 2

Postby DagKS » Mon Jul 05, 2010 8:10 am

In your review you wrote:

"Despite its FHSS technology and feature-set, this radio (with the standard module/receiver) is not recommended for large or fast models however. The lack of failsafe sees to that. "

Coudn't you just use a GWS fail safe?

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=4283
DagKS
 
Posts: 8
Joined: Wed Jun 30, 2010 6:51 am

PreviousNext

Return to 2.4GHz radios/modules/receivers

Who is online

Users browsing this forum: No registered users and 2 guests

cron