Turnigy 9x v2 - FrSky Module vs DIY
Posted: Sun Mar 25, 2012 10:42 pm
Gentlemen,
I have had some problems with my Turnigy Stock 9x v2 tx, I have had signal drop out in certain locations around my house and .5-1s delays from the throttle/aileron/elevator/rudder controls. I have been reading the reviews and so on... Everyone seems to be pushing for the DIY Kit from FrSky. Personally I don't want to solder on the Tx as I plane to buy a Jr Radio in the future once the Turnigy breaks (due to use/accident). So a module is more desired.
I'm looking at this module
http://www.hobbyking.com/hobbyking/stor ... X_V2_.html
I plan on removing the stock 9x antenna, I shouldn't have much a problem installing the module correct? I mean everywhere I look people dont mention using the module with a v2 9x, only the v1 9x. the v2 9x most people recommend the DIY but i am trying to avoid that solution.
any input would be greatly appreciated.
Many thanks.
I have had some problems with my Turnigy Stock 9x v2 tx, I have had signal drop out in certain locations around my house and .5-1s delays from the throttle/aileron/elevator/rudder controls. I have been reading the reviews and so on... Everyone seems to be pushing for the DIY Kit from FrSky. Personally I don't want to solder on the Tx as I plane to buy a Jr Radio in the future once the Turnigy breaks (due to use/accident). So a module is more desired.
I'm looking at this module
http://www.hobbyking.com/hobbyking/stor ... X_V2_.html
I plan on removing the stock 9x antenna, I shouldn't have much a problem installing the module correct? I mean everywhere I look people dont mention using the module with a v2 9x, only the v1 9x. the v2 9x most people recommend the DIY but i am trying to avoid that solution.
any input would be greatly appreciated.
Many thanks.