Hi Bruce, nice going there - got to have something to do while the rain pours down I suppose (even though it is nice sitting in the arm-chair by the fire side..!)
Could you cover a little bit about what programming and mixing features the transmitter has, specifically for full house gliders (ie crow braking, flap settings, flight modes/ conditions.. etc) How many model memories does the tx have?
I am quite keen on the idea of a transmitter that can be reprogrammed and customised, like appears to be possible with this one...
With the module issue, is it possible that the reason that the aerial needs to be soldered on to the module is because the standard module bay only has a single pin for the PPM signal, not a double pin like would be required for the coax lead that goes to the aerial..? In the "normal" modules the PPM out pin is not used because the module box itself has the aerial connection connector, the old telescopic aerial does not get used...
I would also be interested in a good source of the solder connectors for the aerial wires from...