RX battery question

Here's an area where you can ask any kind of question about RC models and find a whole lot of useful information to help you get started.

RX battery question

Postby entomophile » Sat Dec 31, 2011 2:13 am

Dumb question but... I have a FrSKy V8FR-HV receiver. Where do I connect the battery? It is an 8 channel receiver but there are only 8 sets of pins, one for each channel. Do I plug the battery into any set of pins and loose one channel? -Greg
User avatar
entomophile
 
Posts: 12
Joined: Thu Dec 22, 2011 1:44 pm
Location: NJ

Re: RX battery question

Postby quarry44 » Sat Dec 31, 2011 3:11 am

You can plug the battery into any spare channel,or connect it together with one of the servo's via a Y-lead.The Y-lead then plugs into the same place the servo would normally go.
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am

Re: RX battery question

Postby entomophile » Sat Dec 31, 2011 1:26 pm

Ah. Y-Lead, thank you.
User avatar
entomophile
 
Posts: 12
Joined: Thu Dec 22, 2011 1:44 pm
Location: NJ


Return to For Beginners (if you're just getting started in RC)

Who is online

Users browsing this forum: No registered users and 0 guests

cron