How could i fit a Hobbyking Supermicro Module into a 9x V2

If you've been building electronic bits or modifying stuff you've bought then tell us all about it here. A good place to discuss the installation of 2.4GHz DIY modules too.

How could i fit a Hobbyking Supermicro Module into a 9x V2

Postby Magicmole » Tue Jan 03, 2012 10:29 am

Hi all,

I was wandering how could i fit one of these http://www.hobbyking.com/hobbyking/stor ... dule_.html
into a 9x V2?


Thanks :)
Magicmole
 
Posts: 1
Joined: Tue Jan 03, 2012 10:24 am

Re: How could i fit a Hobbyking Supermicro Module into a 9x

Postby quarry44 » Tue Jan 03, 2012 8:28 pm

It's a JR type module,so all you should need to do is remove your turnigy module,cut the aerial wire,push it back into tx,and insert this module.Having said that,I have no knowledge of this module itself.
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am


Return to DIY Projects and Hacks

Who is online

Users browsing this forum: No registered users and 0 guests

cron