Video channels and fly-ins.

To discuss all things relating to flying models via remote video

Re: Video channels and fly-ins.

Postby BillGriffiths100 » Tue Jan 24, 2012 9:43 am

I was hoping for a more technical answer but thanks for that.
So the polarisation although affected by the angle of the cloverleaf is propagated in a way that's independent of 180 degree physical orientation how does that work?
Last edited by BillGriffiths100 on Wed Jan 25, 2012 9:42 am, edited 1 time in total.
Compromising with out of control government is like living with a lion, sooner or later the bloody thing will eat you .

You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
User avatar
BillGriffiths100
 
Posts: 553
Joined: Mon Sep 20, 2010 2:04 pm
Location: London UK

Re: Video channels and fly-ins.

Postby Shotglass » Tue Jan 24, 2012 10:10 am

because regardless of which way you turn a screw the thread will still go the same way

also:
BillGriffiths100 wrote:So the polarisation although affected by the angle of the cloverleaf

huh?
Shotglass
 
Posts: 106
Joined: Mon Jun 27, 2011 5:52 pm

Re: Video channels and fly-ins.

Postby BillGriffiths100 » Tue Jan 24, 2012 12:12 pm

Shotglass wrote:because regardless of which way you turn a screw the thread will still go the same way

also:
BillGriffiths100 wrote:So the polarisation although affected by the angle of the cloverleaf

huh?

huh?
Sneaking suspicion that you don't actually know!(Again)!
Ok the answers to my questions can be found at these two sites:
http://www.radio-electronics.com/info/a ... zation.php
http://en.wikipedia.org/wiki/Circular_polarization
If anyone's interested....
Compromising with out of control government is like living with a lion, sooner or later the bloody thing will eat you .

You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
User avatar
BillGriffiths100
 
Posts: 553
Joined: Mon Sep 20, 2010 2:04 pm
Location: London UK

Re: Video channels and fly-ins.

Postby chrisjunkie » Tue Jan 24, 2012 8:56 pm

Shotglass wrote:because regardless of which way you turn a screw the thread will still go the same way


What if it's a left hand thread? Your point is invalid.
chrisjunkie
 
Posts: 45
Joined: Sun Jan 08, 2012 12:10 pm
Location: Eastern Suburbs, Auckland, New Zealand

Re: Video channels and fly-ins.

Postby Shotglass » Tue Jan 24, 2012 9:35 pm

chrisjunkie wrote:
Shotglass wrote:because regardless of which way you turn a screw the thread will still go the same way


What if it's a left hand thread? Your point is invalid.


then it would be the other handed polarization
and no it isnt
Shotglass
 
Posts: 106
Joined: Mon Jun 27, 2011 5:52 pm

Previous

Return to FPV

Who is online

Users browsing this forum: No registered users and 2 guests

cron