Nano Receiver and transmitter to match

Had good or bad service from a supplier, online store or hobby shop? Share your experiences here.

Nano Receiver and transmitter to match

Postby GrantCowe » Sat Feb 25, 2012 12:04 am

Hi Bruce, love all the videos and the helpful information. Just bought a EDF jet but I need to get hold of a 2.4 GHz nano receiver and a transmitter to match but I am finding it really hard to get hold of one! Got any ideas? :D
GrantCowe
 
Posts: 5
Joined: Sat Feb 25, 2012 12:00 am

Re: Nano Receiver and transmitter to match

Postby hakank » Sat Feb 25, 2012 6:04 am

Do you have a link to a nano receiver and someone is probably able to figure out a compatible transmitter?
User avatar
hakank
 
Posts: 49
Joined: Fri May 07, 2010 3:48 pm
Location: Stockholm County, Sweden (59.401,17.9515)

Re: Nano Receiver and transmitter to match

Postby GrantCowe » Sat Feb 25, 2012 1:01 pm

No sorry, I've lookeed around, I'm really kind of hoping other people have links that can help :S
GrantCowe
 
Posts: 5
Joined: Sat Feb 25, 2012 12:00 am

Re: Nano Receiver and transmitter to match

Postby hakank » Sat Feb 25, 2012 6:00 pm

So you haven't purchased either of receiver or transmitter yet? But the set needs to include a very small receiver?
/Håkan
User avatar
hakank
 
Posts: 49
Joined: Fri May 07, 2010 3:48 pm
Location: Stockholm County, Sweden (59.401,17.9515)

Re: Nano Receiver and transmitter to match

Postby GrantCowe » Sat Feb 25, 2012 7:26 pm

Yeah :(, sorry im quite new to rc and was quite annoyed to find taht my plane didnt come with transmitter and receiver just need a little help getting off the ground :L
GrantCowe
 
Posts: 5
Joined: Sat Feb 25, 2012 12:00 am

Re: Nano Receiver and transmitter to match

Postby John_Edward » Sat Feb 25, 2012 9:11 pm

How nano exactly ?
Hobbyking has the SuperMicro series, they are tiny. http://www.hobbyking.com/hobbyking/stor ... Micro.html
Humanity is conformity
Conformity is society
Society is this reality
User avatar
John_Edward
 
Posts: 40
Joined: Mon Jul 04, 2011 7:54 am

Re: Nano Receiver and transmitter to match

Postby GrantCowe » Sun Feb 26, 2012 8:20 pm

This is the model I have ( http://www.bananahobby.com/2157.html ) so it needs to fit inside the cockpit, there is barely any room after I have the battery in so really quite small.
GrantCowe
 
Posts: 5
Joined: Sat Feb 25, 2012 12:00 am

Re: Nano Receiver and transmitter to match

Postby John_Edward » Sun Feb 26, 2012 9:18 pm

Check if one of these from FrSky fits in:
The regular 4channel reciever, size 34.5x19.5x8mm.
The micro 4channel, size 21x16x5.8mm

If these fit, I suggest you get a Turnigy 9X, and upgrade it to the FrSky, with either telemetry or not.
http://www.hobbyking.com/hobbyking/store/__8991__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_1_v2_Firmware_.html
http://www.hobbyking.com/hobbyking/store/__8992__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_2_v2_Firmware_.html

http://www.hobbyking.com/hobbyking/store/uh_listCategoriesAndProducts.asp?idCategory=402&v=&sortlist=P

For more info about the Turnigy 9X, FrSky, telemetry and such, read the forums :)
Humanity is conformity
Conformity is society
Society is this reality
User avatar
John_Edward
 
Posts: 40
Joined: Mon Jul 04, 2011 7:54 am

Re: Nano Receiver and transmitter to match

Postby hakank » Tue Feb 28, 2012 5:04 pm

Another alternative would be to purchase a Spektrum DX6i (I have 3 of them and love them everyone) and the Orange 6 channel receiver: http://www.hobbyking.com/hobbyking/stor ... Port_.html
pull out the receiver from the box and it will fit into the canopy.

/Håkan
User avatar
hakank
 
Posts: 49
Joined: Fri May 07, 2010 3:48 pm
Location: Stockholm County, Sweden (59.401,17.9515)

Re: Nano Receiver and transmitter to match

Postby GrantCowe » Tue Feb 28, 2012 5:37 pm

Only problem with that Hakan is that the cables are all nano size attatchments, and thanks for the advice will look over each option
GrantCowe
 
Posts: 5
Joined: Sat Feb 25, 2012 12:00 am

Next

Return to Where to buy (and not to buy)

Who is online

Users browsing this forum: No registered users and 0 guests

cron