Second LED on Frsky hack

If you've been building electronic bits or modifying stuff you've bought then tell us all about it here. A good place to discuss the installation of 2.4GHz DIY modules too.

Second LED on Frsky hack

Postby indyjem » Fri Mar 02, 2012 10:28 pm

Bruce, I like you would prefer to have the LED facing the front so as to be very visible, but am having trouble finding room on an installation. Any harm in soldering in wire leads to a red/green three lead individual LED that would easily fit forward facing (just a 3mm hole) and mounting the switch board out the back?
indyjem
 
Posts: 19
Joined: Mon Dec 06, 2010 7:38 pm

Re: Second LED on Frsky hack

Postby Keith » Fri Mar 02, 2012 11:36 pm

I found room...

Image
If anyone is feeling a bit paranoid....BEHIND YOU....
Keith
 
Posts: 219
Joined: Fri Jul 01, 2011 2:22 pm
Location: Melbourne... Australia...

Re: Second LED on Frsky hack

Postby RCModelReviews » Sat Mar 03, 2012 12:24 am

yes, that's the best place to mount the LED/bind board. It's very visible but well out of the way where the button won't accidentally get pressed.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: Second LED on Frsky hack

Postby Keith » Sat Mar 03, 2012 11:38 pm

I also mounted the board inside the empty module....

Image



I used a JST connector so I can still remove the back to upgrade other radios without removing USB...

Image
If anyone is feeling a bit paranoid....BEHIND YOU....
Keith
 
Posts: 219
Joined: Fri Jul 01, 2011 2:22 pm
Location: Melbourne... Australia...


Return to DIY Projects and Hacks

Who is online

Users browsing this forum: No registered users and 4 guests