Home Made A123 Receiver Pack

Nicad, NiMH, Lithium, A123? If it's transmitter or receiver batteries you want to talk about, do it in this forum.

Re: Home Made A123 Receiver Pack

Postby Treebuster » Wed Feb 01, 2012 9:51 pm

I buy my A123 packs from here: http://epbuddy.com/ since they are only 200 miles from where I live. Got a 1100mah pack for 19.95 U.S. and have been using it all last summer to power my 60 sized gas model with 4 std servos and optic receiver. Good for at least 4 - 5 flights.

Might want to check them out. Not sure what ship cost or pricing compared to other sites/countries. They carry a lot of 123 packs and chargers and ship same day or next when you place order. Can't hurt to look.
User avatar
Treebuster
 
Posts: 18
Joined: Sat Jan 08, 2011 5:39 am
Location: Thompson, Ohio USA

Re: Home Made A123 Receiver Pack

Postby RCMikeofIndiana » Mon Mar 05, 2012 7:14 pm

I missed the last two times the 1100's were available from Hobbyking. I ended up purchasing these:

http://www.hobbyking.com/hobbyking/stor ... oduct=6444

I assume (yes... I know about assuming!) that these are the same just 2300 mah instead of 1100. All else being some what equal I have 2 questions. Should I add a Dean plug for charging or just a heavy duty JR/plug wire? Would I need a heavy duty switch as well? Any recommendation for the last two questions?
User avatar
RCMikeofIndiana
 
Posts: 19
Joined: Mon Jan 24, 2011 2:11 am

Re: Home Made A123 Receiver Pack

Postby quarry44 » Mon Mar 05, 2012 8:15 pm

I use standard Futaba type connections on my 2-cell packs,and charge at 1c.Had no problems with wires heating up,so i would say you don't need heavy duty wiring or switch.If you wanted to charge at higher rates,HD wire might be advisable,just to cope with the charging current.YMMV,ACNR,DTTAH,etc.
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am

Re: Home Made A123 Receiver Pack

Postby intelligencer » Thu Jul 19, 2012 1:55 pm

Hello

I watched the A123 receiver pack youtube video.

I suspect the items required have disappeared off the inventory of the suppliers.

Can anyone post me the exact product pages for the:

1. 2s balance charging pigtail lead

2. The finishing heatshrink for the entire pack.

Much appreciated.
intelligencer
 
Posts: 1
Joined: Thu Jul 19, 2012 1:50 pm

Re: Home Made A123 Receiver Pack

Postby pldb64 » Fri Jul 20, 2012 2:59 am

Alternatively you might consider looking at the LiFE Rx packs that HK (or others) sell. Saves all the DIY fussing (unless you particularly want to be doing the DIY part of course).
Turnigy 9x, FrSky 2-Way/Telemetry DHT DIY, Smartieparts BRD, ER9x FW
AXN-Floater (stock esc, motor & prop, HK orange 9g servos)
pldb64
 
Posts: 156
Joined: Fri Nov 04, 2011 3:09 am
Location: Sydney, australia

Previous

Return to Receiver/transmitter Batteries

Who is online

Users browsing this forum: No registered users and 1 guest