AXN questions :yes more Axn queries :-)

For model airplanes powered by volts rather than fuel

AXN questions :yes more Axn queries :-)

Postby S-rob » Mon Jun 18, 2012 8:11 am

Hi there, after a few months of bixler/axn indecision.....
I pushed the button & have a AXN on the very slow boat to NZ

Ive downloaded Bruces build vids (much appreciated, thanks) , pretty much bought those recommended parts
Any other updates on AXN builds worth noting??
- glue or tape in the wings ??
- whats the bigger prop that has been mentioned, whats that exact model prop so I can order one ?
- I was told to buy a prop collet/holdeer thingy as the OEM prop/collet/? is a poor fit ?
- any thoughts on strengthening the nose, fibreglass/epoxy it ?? That will be getting squished with my landing style ;)
- a local has mounted a single wheel on his , any thoughts on wheels ?

I was also thinking about attaching 600 Heli skids on it (just the curved tubes) . Very light & dirt cheap, may help protect the nose a bit ??

Cheers

A local newb did just get a Bixler, it flew nicely . He only had about 15minutes on a small trainer before soloing the Bixler.
I guess big planes are easier
S-rob
 
Posts: 82
Joined: Wed Nov 24, 2010 8:40 am

Re: AXN questions :yes more Axn queries :-)

Postby Malcurin » Mon Jun 18, 2012 8:43 am

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7936 for the bigger prop
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5122 for the adaptor ( gold is better :P)
I glued my wings the plane is small and easy to transport
leave the Nose, when it gets bent, just pour some just boiled water over it and it will come back to shape im told, i haven't tried it yet, gotta crash first :) the Nose is designed to bend and take the impact a bit the hot water trick works well from what I've read

Wheels have been tried and they just create more problems then they are worth

Just make it light get the cg right go high up and keep it close to you then glide a lot :)
also balance the propeller if you can, its worth it I used a hand one to do mine got it pretty accurate
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
Malcurin
 
Posts: 134
Joined: Sun May 13, 2012 8:24 am
Location: Matamata New Zealand

Re: AXN questions :yes more Axn queries :-)

Postby quarry44 » Mon Jun 18, 2012 9:17 pm

The prop you want is hk's apc-style 6x4E.They're not always in stock,so I just put a standard 6x4 on,and it seems to work just as well.Don't add fibreglass,too heavy.Just a bit of tape under the front fuse will help curb bottom damage.As for the wheel,I had though of that too.A single wheel let into the bottom,near the CG might be ok.
I've tried taking off from level grass,but all it does is ground loops.
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am

Re: AXN questions :yes more Axn queries :-)

Postby S-rob » Thu Jun 21, 2012 6:59 am

Its arrived
Delivery only took 16 days to NZ !!! on the cheapest freight option.
HK are getting faster .

Looks like it will be a really easy, fast build.
the finish is superb. Must be all the shiney bare white foam. Maybe thats why white T28's look so pretty .
Some of my other planes have a awefull paint finish, making them superficially look really cheap & nasty.
OEM silver paint looks really bad
Good weather for build projects.
Cheers
:D
S-rob
 
Posts: 82
Joined: Wed Nov 24, 2010 8:40 am

Re: AXN questions :yes more Axn queries :-)

Postby S-rob » Sat Jun 23, 2012 7:03 am

And finished.
How do I get the OEM prop saver off?, seems to be stuck on the motor shaft

The Atom in comparison. Hard to belive price is almost the same
Image

This is the only place I could fit the rx. Stuck under the canopy
Image
S-rob
 
Posts: 82
Joined: Wed Nov 24, 2010 8:40 am

Re: AXN questions :yes more Axn queries :-)

Postby Malcurin » Sat Jun 23, 2012 11:32 am

nice looks good
You cant get it off its glued on, :( kinda sucks too because I believe its making most of the Noise of the propeller

Enjoy the AXN

Mike
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
Malcurin
 
Posts: 134
Joined: Sun May 13, 2012 8:24 am
Location: Matamata New Zealand

Re: AXN questions :yes more Axn queries :-)

Postby S-rob » Sun Jun 24, 2012 6:35 am

Any good idea's about a off the shelf longer aileron pushrod??
I should have checked before gluing in the servos . It only just works, on the mid hole on the aileron horn. Cant use the bottom hole (for more travel)

Any subtrim/up elevator needed for take-off on the 1st flight ??
S-rob
 
Posts: 82
Joined: Wed Nov 24, 2010 8:40 am

Re: AXN questions :yes more Axn queries :-)

Postby BillGriffiths100 » Sun Jun 24, 2012 8:05 am

Any good idea's about a off the shelf longer aileron pushrod??

Get yourself some piano wire the right gauge and some nose pliers and bend up your own, only takes a moment!
Compromising with out of control government is like living with a lion, sooner or later the bloody thing will eat you .

You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
User avatar
BillGriffiths100
 
Posts: 553
Joined: Mon Sep 20, 2010 2:04 pm
Location: London UK

Re: AXN questions :yes more Axn queries :-)

Postby magpupu2 » Wed Aug 22, 2012 10:44 pm

for aileron pushrods since i do not have piano wire, what i did was i used a small paper clip. straightened it as best as i could and put a z bend on to it.
magpupu2
 
Posts: 14
Joined: Tue Nov 15, 2011 4:22 pm


Return to Electric power

Who is online

Users browsing this forum: No registered users and 2 guests

cron