Fatshark Headtracker & Turnigy 9x: Reverse just 1 Chan?

[Evil_Jon]

Hello, an RC newbie here.

I have a Fatshark Predator and a Turnigy 9x. I've got the headtracker working but unfortunately I need to reverse the pan servo. I've tried setting the "gyro" (pan channel) to reverse in the 9X but that didn't do anything. I tried reversing within the Fatshark but that reverses both servos and I end up with a backwards tilt instead.

Seems like I should be able to reverse the channels within the 9X but for some reason it's not working.

Any ideas?

Thanks.

[Keith]

You can reverse it in the 9x but I can't remember how since I use ER9x now, or you can get an extension wire that reverses the servo. I use them when I use the same channel for rudder and front wheel sterring...

[francoishaha]

Hi i got the same setup as you. There should have no probleme reversing a servo with the 9x.
i will try is and reply back.

[Sampey]

Just a thought, upgrade firmware to ER9X? then you can do anything you like with your radio, no limits programming