Graupner MC-16/20(Crow Brake's)

If you want to see a product reviewed on RCModelReviews, make your suggestion here and, if there's enough interest, I'll see what I can do.

Graupner MC-16/20(Crow Brake's)

Postby Malcolm2009 » Wed Jan 16, 2013 2:18 pm

Help required setting up Graupner MC-16/20 (Crow Brake's)
I have set the servos 2 left aileron,6 left flap,5 right aileron,7 right flap,to work in the correct directions.
I have set Freely programmable mixer 'A',to mix the ailerons & flaps as follows-
'A' Mixer Ach 26
ASW ON
MIX-25%
OFFSET 0
And ALL the flap & ailerons work in the correct directions.

When I set the crow brakes up with Mix SAO & SFO as follows-
MIX SAO-40%
OFFSET 0

MIX SFO-40%
OFFSET 0

And then operate Throttle control to deplore the crow brakes the No6 left flap servo goes in the wrong direction, but No7 right flap goes in the correct direction.

The 2 left aileron & 5 right aileron go in the correct direction.

Can any one please help me to set the model up correct for the crow braking?
ie- To get No6 left flap servo going in the correct direction?
Malcolm2009
 
Posts: 3
Joined: Sun May 29, 2011 4:06 pm

Return to Suggest a review

Who is online

Users browsing this forum: No registered users and 0 guests