How to install a trainer plug?

If you've been building electronic bits or modifying stuff you've bought then tell us all about it here. A good place to discuss the installation of 2.4GHz DIY modules too.

How to install a trainer plug?

Postby amtpdb1 » Thu Jun 13, 2013 10:55 pm

I purchased an airtronics rds 8000 many years ago. I purchased a aero sport 5 channel 2.4 radio a few years back to just get the receiver. I was wondering how hard it would be to set up the aero sport to be a trainer box? It does not have a plug so it would have to be installed and someone would have to know what wires to attach to where. Anyone want to take a shot at it? I am sure some of you are saying that it is simple and why don't you jump in and teach the rest of us something?
Thanks for any help in this project. Pictures would be nice with an explanation on what is being done.

Thanks
Don
amtpdb1
 
Posts: 19
Joined: Sat Apr 14, 2012 7:21 pm

Re: How to install a trainer plug?

Postby ergocentric » Fri Jun 21, 2013 3:10 pm

http://users.belgacom.net/TX2TX/

loads of reading, for the most part you will have to find a compatible signal in your transmitter
unconcerned but not indifferent - MAN RAY
User avatar
ergocentric
 
Posts: 350
Joined: Sat Jun 05, 2010 9:45 pm
Location: small town, Ontario, Canada

Re: How to install a trainer plug?

Postby LeaUK » Fri Aug 02, 2013 6:42 am

If you're handy with a soldering iron and have at least a PC based scope http://www.zeitnitz.de/Christian/scope_en you can probe around the PPM IC for an appropriate signal http://sdrv.ms/16nWp2f

Although this technique was successful for grabbing a signal for Simulation, I'm not sure about the full characteristics of trainer plugs :-(

Lea
LeaUK
 
Posts: 4
Joined: Sun Jul 21, 2013 9:04 am

Re: How to install a trainer plug?

Postby amtpdb1 » Sat Aug 03, 2013 1:33 am

Lea:
Thanks I will have to take a look at it.
Thanks for your time.
Have a nice weekend.

Don
amtpdb1
 
Posts: 19
Joined: Sat Apr 14, 2012 7:21 pm


Return to DIY Projects and Hacks

Who is online

Users browsing this forum: No registered users and 2 guests