Collets

Motors, speed controllers, batteries and other e-power stuff

Collets

Postby Bruce8 » Tue Feb 26, 2013 5:34 pm

Hi guys slightly nooby question: is a prop adapter the same as a collet? The reason I ask is because I want a 3mm collet for my AXN
Thanks
Bruce8
 
Posts: 20
Joined: Wed Jan 02, 2013 11:43 am

Re: Collets

Postby quarry44 » Tue Feb 26, 2013 6:52 pm

There are two types.One is fixed to the shaft with a set screw through the side,the other is the collet type,which clamps onto the shaft when the propellor is tightened.In either case,I recommend a drop of superglue on the shaft to make sure it stays on.
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am

Re: Collets

Postby Bruce8 » Tue Feb 26, 2013 8:17 pm

Thanks very much!
Bruce8
 
Posts: 20
Joined: Wed Jan 02, 2013 11:43 am

Re: Collets

Postby flaper » Mon Sep 30, 2013 10:02 pm

Sorry guys I am sort of new to posting....Do not know where to go to post something.
can someone steer me in the right direction.
Thank you for any help you can offer
flaper
 
Posts: 1
Joined: Mon Sep 30, 2013 9:46 pm


Return to Electric Power Systems

Who is online

Users browsing this forum: No registered users and 0 guests