Bruce' FPV Diversity Controller project

If you've been building electronic bits or modifying stuff you've bought then tell us all about it here. A good place to discuss the installation of 2.4GHz DIY modules too.

Re: Bruce' FPV Diversity Controller project

Postby RONALD MCDONALD » Thu Feb 21, 2013 6:28 pm

chossy wrote:i have ordered the parts to go down Rixx's route but Ronald's 4 RX picaxe route also looks good.
Now can i merge the 2 projects and do away with the relay/arduino as i had planned to make the RX/Power/Relay/switcher boards all modular (is that the correct term) so if something breaks i just swap it out.
Ronald would you mind answer a few questions i have ?

Here is the video distribution amp you asked for.
Attachments
Video amp.jpg
Video amp.jpg (106.18 KiB) Viewed 21063 times
RONALD MCDONALD
 
Posts: 30
Joined: Thu May 03, 2012 2:53 pm

Re: Bruce' FPV Diversity Controller project

Postby chossy » Fri Feb 22, 2013 1:18 pm

RONALD MCDONALD wrote:
chossy wrote:i have ordered the parts to go down Rixx's route but Ronald's 4 RX picaxe route also looks good.
Now can i merge the 2 projects and do away with the relay/arduino as i had planned to make the RX/Power/Relay/switcher boards all modular (is that the correct term) so if something breaks i just swap it out.
Ronald would you mind answer a few questions i have ?

Here is the video distribution amp you asked for.


Thanks Ronald .
5w audio amp working now just this and program the oled and should be done.
chossy
 
Posts: 5
Joined: Thu Feb 07, 2013 5:22 pm

Re: Bruce' FPV Diversity Controller project

Postby hammer833 » Sat Mar 02, 2013 5:35 pm

Bruce how are things coming on this project? I can't wait to build one of these! Your super simple instructions makes all this "electronic voodoo" stuff easy to follow. I have no electronics experience and can't read that schematic mambo jumbo, but I can solder. I have built 3 over your FPV backpacks that work flawlessly using your instructions. But I need a Diverse city controller and I'm not paying $100 plus for one of the commercially available ones that only two inputs and not four like yours. And its only $25!!

Any way, was just wondering where things were at.

Thanks Rick
hammer833
 
Posts: 1
Joined: Wed Mar 28, 2012 11:18 pm

Re: Bruce' FPV Diversity Controller project

Postby denis1 » Thu Mar 14, 2013 9:39 am

Hi Bruce, just wondering how you are getting along with your design of your 4 way diversity unit. Keen to make one. Thanks.
denis1
 
Posts: 2
Joined: Thu Mar 14, 2013 9:36 am

Re: Bruce' FPV Diversity Controller project

Postby denis1 » Thu Mar 14, 2013 9:44 am

Looks good bruce, would you mind doing a video and parts for this project, Thanks again.
denis1
 
Posts: 2
Joined: Thu Mar 14, 2013 9:36 am

Re: Bruce' FPV Diversity Controller project

Postby Buzzard » Wed Apr 24, 2013 8:36 am

Hi Bruce, I know you are busy and a little stressed at the moment. However I am looking for a reliable Diversity controller.. Are you selling this as a completed system or a kit?
User avatar
Buzzard
 
Posts: 8
Joined: Wed Jun 23, 2010 4:22 am
Location: Sydney Australia

Re: Bruce' FPV Diversity Controller project

Postby mtesa » Wed Oct 09, 2013 8:07 am

Maybe I'm blind a bit and slow a bit more, but I could not find finished diversity switch in this thread ... ?!?
Is this project completed?
mtesa
 
Posts: 17
Joined: Tue Nov 23, 2010 2:47 pm

Re: Bruce' FPV Diversity Controller project

Postby sindre » Wed Oct 09, 2013 11:28 am

Nope, not finished
sindre
 
Posts: 17
Joined: Sun Nov 06, 2011 9:34 am
Location: M&R, Norway

Re: Bruce' FPV Diversity Controller project

Postby mtesa » Wed Oct 09, 2013 5:11 pm

bummer
mtesa
 
Posts: 17
Joined: Tue Nov 23, 2010 2:47 pm

Re: Bruce' FPV Diversity Controller project

Postby bob332 » Sat Oct 12, 2013 5:12 pm

bump to get this done :D
bob332
 
Posts: 4
Joined: Sat Jul 02, 2011 7:28 am

PreviousNext

Return to DIY Projects and Hacks

Who is online

Users browsing this forum: No registered users and 13 guests

cron