I need it all.

Here's an area where you can ask any kind of question about RC models and find a whole lot of useful information to help you get started.

I need it all.

Postby flexakaMal » Fri Sep 24, 2010 11:44 pm

Just about to get into RC planes.
Thinking the AXN Floater from Hobbyking.Is it a good choice?
Also going to make one from scratch.
A TR/RX system from Hobbyking as well which one?
Tossing up between the HK 6 channel or the Turnigy 9X leaning towards the 9x, suggestions comments...
No coffee no worky :)
flexakaMal
 
Posts: 16
Joined: Fri Sep 24, 2010 11:06 pm
Location: Vic Austalia

Re: I need it all.

Postby RCModelReviews » Sat Sep 25, 2010 12:03 am

For the difference in price, the 9X is a much better option than the 6-channel.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: I need it all.

Postby flexakaMal » Sat Sep 25, 2010 12:12 am

RCModelReviews wrote:For the difference in price, the 9X is a much better option than the 6-channel.


Thanks I suspected as much. Now just have to wait for them to show up in Aus.....

Thanks for the site too,well done!!!
No coffee no worky :)
flexakaMal
 
Posts: 16
Joined: Fri Sep 24, 2010 11:06 pm
Location: Vic Austalia

Re: I need it all.

Postby crampy » Sat Sep 25, 2010 3:50 am

I've got an AXN Floater Jet on the way right now. Should be either Monday or Tuesday. From the reviews I've seen, it's a great starter plane. Plenty of power and it's got ailerons, so no need to buy a 3 channel plane, then move up to a 4 channel. It's pretty quick going by the youtube clips I've seen, but also glides very well with power of.

With the pusher style motor mount, there's no problems with crashing it in and breaking props and motors etc.

Keep an eye on the ESC though. It's been known to fry itself quick smart. I'm going to upgrade mine to a Mystery 30amp one and a APC 6x4 prop. Eventually, I'll go to a 2600kv motor I'm getting from RCTimer.

Another thing is you need to flex the control surfaces a bit before assembly, as they are very stiff and need a bit of working in to get decent throws.

I'l let you know more once it's turned up.
crampy
 
Posts: 40
Joined: Wed Jun 23, 2010 10:33 am

Re: I need it all.

Postby flexakaMal » Sat Sep 25, 2010 4:51 am

Thanks crampy , I'am looking forward to your report :)
No coffee no worky :)
flexakaMal
 
Posts: 16
Joined: Fri Sep 24, 2010 11:06 pm
Location: Vic Austalia

I have this on the way

Postby flexakaMal » Sun Sep 26, 2010 9:42 am

http://www.dealextreme.com/details.dx/sku.15580
Dynam RC Tech 6-Channel USB R/C Airplane/Helicopter Flight Simulator with FMS Software (Mode 2)

Has anyone used one? IF so any tips? (I will be getting a mode 2 TX btw)
No coffee no worky :)
flexakaMal
 
Posts: 16
Joined: Fri Sep 24, 2010 11:06 pm
Location: Vic Austalia

Re: I need it all.

Postby RCModelReviews » Sun Sep 26, 2010 8:19 pm

I think some of the guys in our club have used these and once you get them installed (not always a straightforward task) they work quite well -- for the price.
RCModelReviews.com, just the facts.
User avatar
RCModelReviews
 
Posts: 2120
Joined: Tue May 04, 2010 3:40 am

Re: I need it all.

Postby crampy » Tue Sep 28, 2010 12:14 am

Well the AXN Floater Jet has arrived form HK. Very nicely packaged and labelled top stow only, so thumbs up to hobby King for that. Good delivery time too.

Upon onpening the box the plane looks really nice, but on closer inspection I have a few things I want to change. The sevos aren't fixed very well, so move a bit on high throws. I"ll probably glue them in properly before any flying hahaha. I moved the control linkages to allow maximum surface throw too. If need be I'll dial it down electronically, rather than mechanically.

So throws look good now. We'll see how it goes in the air soon. It's supposed to have useless roll, but I'm hoping my throws will help that.

Now the power system. It's a bit of a beast for a glider. With everything stock (5x5 prop), I saw peak current of 16amps, and about 180ish watts. I put an APC 6x4 electric prop on it and it peaked at 20amps and 220watts with my 2200mah 3S 20C Zippy pack. It pushes a lot better with the APC 6x4, but I don't think the ESC is going to handle long throttle pulls. It was getting hot after a few run ups on the bench. The stock ESC is a Turnigy 20amp one, which is well known for smoking itself. I've got a 30amp Mystery ESC to go in. I've also got some other motors from RCTimer I'll probably swap to later on too. We'll see how the stock motor lasts.

I'm still weighing up whether or not to swap the servos to HXT900s. The stock ones are so so, but I might just give them a go to start with.

I'll be using the 2200mah packs, so need to cut out the battery compartment a bit and then mount my radio gear and put the ESC somewhere so it'll get a bit of air. I've got a FrSKy 7 channel reciever in it, so I can use two channels for ailerons. I'll be able to do some flapperon and spoileron mixing just for fun. That's all running off my Turnigy 9X with JR FRSKy tranmsitter module. The mixing on the 9X is quite easy to work out, so it'll be good to try out some different settings with this plane.
crampy
 
Posts: 40
Joined: Wed Jun 23, 2010 10:33 am

Re: I need it all.

Postby flexakaMal » Tue Sep 28, 2010 7:24 am

I will make a note to myself to get a another esc as I have the same batt that I planed on using plus a 1800mah s2 brought them when I decided on the plane. Rather than get it all at once..

This esc http://www.dealextreme.com/details.dx/sku.13022

I wish HK would get the AUS store working rather than open for marketing reasons......
No coffee no worky :)
flexakaMal
 
Posts: 16
Joined: Fri Sep 24, 2010 11:06 pm
Location: Vic Austalia

Re: I need it all.

Postby crampy » Tue Sep 28, 2010 12:47 pm

I just ran up my replacement power system. RCTimer 2600kv motor with a gas 6x4 prop. 28 amps on a 3s pack. Over 300 watts!!! It might be a bit much for my Mystery 30amp ESC. Might need to go bigger or manage the throttle a bit.

I'll go to that when the stock motor either blows up or I get sick of it.
crampy
 
Posts: 40
Joined: Wed Jun 23, 2010 10:33 am

Next

Return to For Beginners (if you're just getting started in RC)

Who is online

Users browsing this forum: No registered users and 0 guests