Hi, no nothing changed on my gear. Also the HS mode change works fine too (blinks AFTER you remove your finger).
My first thought is that you somehow mixed the FW versions you loaded...
ppxav wrote:thanx to you i did my RX upgrade using this:
http://cgi.ebay.com/Serial-Converter-US ... 4151d82e65
and TX using the supplied cable.
all went ok ,need a 12W soldering iron with sharp tip to solder those 3 cables inside RX ( see picture above page 2 )
thanx everyone for sharing your experience.
cheers
xav
Users browsing this forum: No registered users and 24 guests