Signal splitter

If you've got a problem then you can ask here and either I or others will likely come to your rescue.

Signal splitter

Postby Aviator » Sun Mar 27, 2011 10:01 pm

Hi guys. I hope someone can help me out.

What I am trying to do is to hinge ailerons with no gap. I have done it on few of my foam planes and it works good... but with a small down draw - it has a free play in its neutral position.
It works like this:

http://www.youtube.com/watch?v=vAXEDKb0OXM

To eliminate the free play I need to have a signal split between two servos that while one servo is moving the aileron down, the other servo remains in neutral. Then the first servo will remain in neutral while the second servo is moving the surface up. I hope it makes sense.

streamlinedwing.jpg
streamlinedwing.jpg (17.87 KiB) Viewed 16641 times


So far I tried using logic gates to create a 1.5ms pulse out of the incoming control signal and then direct the control signal to one servo or the other according to its width, while sending 1.5 ms (neutral) to the opposite servo. It doesn't work very well.


I know there are many ways to deal with this problem, so I am looking for a reliable, efficient, more less simple... well you know what I mean.

Any ideas?
:geek:
Aviator
 
Posts: 16
Joined: Sun Mar 27, 2011 9:37 pm
Location: British Columbia, Canada

Re: Signal splitter

Postby pwy » Mon Mar 28, 2011 7:21 am

Hi Aviator,

Logic gates don't work very well, better to use a small microcontroller like a PIC for such things.
My personal version would be to use two channels and some creative mixing in the radio. Simple if you have enough free channels available.

The definitely easiest solution is to be less picky and accept the small gap you get with a standard set up ;-)

Hope you find a way to do it
P.
The difference between men and boys is the price of their toys!
pwy
 
Posts: 49
Joined: Wed Aug 04, 2010 8:30 am
Location: Sydney, Australia

Re: Signal splitter

Postby Flash1940 » Mon Mar 28, 2011 3:14 pm

In flaperon mode....you should be able to do this with travel adjust/(endpoint adjust)....set travel adj. on aileron to 100% - 0% and the other aileron channel.....Aux-2 usually to the same thing.....100% - 0%. This will give you two servos that push or pull.....but not both as do normal ailerons. Use a "Y" connector to establish the other wing set. That's how I would try it.....maybe someone else here may have another idea....

Flash
User avatar
Flash1940
 
Posts: 97
Joined: Sat Sep 04, 2010 2:48 pm
Location: Paris, Kentucky.....Central Kentucky USA

Re: Signal splitter

Postby Aviator » Mon Mar 28, 2011 4:45 pm

Thank you guys! Thank you Flash1940, you are a genius in my books forever! Why didn't I think of it myself?? GRR!!! I spent all this time soldering little tiny SMT chips... (and this morning, just before I read this I finally got it to work!) and now you ruined everything! LOL

Thank you so much!
:-)
Aviator
 
Posts: 16
Joined: Sun Mar 27, 2011 9:37 pm
Location: British Columbia, Canada

Re: Signal splitter

Postby Flash1940 » Tue Mar 29, 2011 2:24 pm

Here's a good thing to always remember..... http://www.2think.org/occams_razor.shtml I even teach this concept to my students when we explore "trouble shooting".

Flash
User avatar
Flash1940
 
Posts: 97
Joined: Sat Sep 04, 2010 2:48 pm
Location: Paris, Kentucky.....Central Kentucky USA

Re: Signal splitter

Postby Aviator » Tue Mar 29, 2011 7:22 pm

Flash1940 wrote:Here's a good thing to always remember..... http://www.2think.org/occams_razor.shtml


Its a good concept, some people call it KIS - Keep It Simple. In order for that principle to work you need to have at least two solutions with one of them being more simple (and just as effective if not more effective) than the other one. So thanks to you I got the most simple and elegant solution to my problem and I am keeping it. And I am still kicking myself for not thinking of it myself :)



I even teach this concept to my students when we explore "trouble shooting".

Flash


Something like - is the switch "ON"? is your power cord plugged in?... is there power in the outlet where the power cord is plugged in?.. is there power entering your system?
After that you need to be very familiar with the system you are working on and its components - what do they each do in the system and identify the one that is not performing. Then you can go deeper.

Trouble shooting an intermittent is one of the difficult ones, because it usually works fine while you are messing with it... :?

A faulty equipment has its usual set of “weak spots” and if you go through a good number of them you become more efficient in identifying the problem.

So.. yeah.. still kicking myself. LOL
:D
Aviator
 
Posts: 16
Joined: Sun Mar 27, 2011 9:37 pm
Location: British Columbia, Canada

Re: Signal splitter

Postby Flash1940 » Tue Apr 05, 2011 8:28 pm

Don't be "kicking" yourself......remember...."self" is your best friend......be GOOD to yourself.....There is only ONE "self".
User avatar
Flash1940
 
Posts: 97
Joined: Sat Sep 04, 2010 2:48 pm
Location: Paris, Kentucky.....Central Kentucky USA


Return to Help Needed

Who is online

Users browsing this forum: No registered users and 4 guests

cron