Hello Everyone,
I have some questions regarding the BD5 Balsa 1105mm
http://www.hobbyking.com/hobbyking/stor ... duct=17137
I have turnigy 8 Channel reciever for it.
1) What would be the right motor and ESC combo?
2) Would it be wise to make it flaperon with 2 servos or cut flaps into the wings with 4 servos plus the elevon servo?
Thanks for the help
Thor
BD5 Electric engine
4 posts
• Page 1 of 1
BD5 Electric engine
by McHannemann » Wed Jul 13, 2011 2:12 pm
- McHannemann
- Posts: 8
- Joined: Mon Jun 27, 2011 1:39 pm
Re: BD5 Electric engine
by McHannemann » Fri Jul 15, 2011 1:33 pm
I'm not aiming to make areobatics with it, I am looking for a stable motor/esc/propeller/battery combination which gives me the longest possible flying time
- McHannemann
- Posts: 8
- Joined: Mon Jun 27, 2011 1:39 pm
Re: BD5 Electric engine
by McHannemann » Mon Jul 18, 2011 10:16 am
I would appreciate some help with it 
- McHannemann
- Posts: 8
- Joined: Mon Jun 27, 2011 1:39 pm
Re: BD5 Electric engine
by McHannemann » Tue Aug 09, 2011 8:46 pm
Sorry for the late reply,
these are the details I have for the plane:
Wing Span 43.5"
Wing Area 230 Sq. In.
Length 31"
Weight 25 TO 28 Ounces
suggested propeller 7-5” APC-E propeller
can only fit the inrunner brushless with diameter of no more than 28mm
I'm looking forward to your help
these are the details I have for the plane:
Wing Span 43.5"
Wing Area 230 Sq. In.
Length 31"
Weight 25 TO 28 Ounces
suggested propeller 7-5” APC-E propeller
can only fit the inrunner brushless with diameter of no more than 28mm
I'm looking forward to your help
- McHannemann
- Posts: 8
- Joined: Mon Jun 27, 2011 1:39 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests