Transmitter Mode....3?

Here's an area where you can ask any kind of question about RC models and find a whole lot of useful information to help you get started.

Re: Transmitter Mode....3?

Postby disco stu » Wed Aug 03, 2011 1:11 pm

I fly mode 3, which as I understand it is the same but opposite to mode 2. When I first came back to RC, I just couldn't handle the 2 sticks moving all over the place. I also flew full scale after I flew RC as a younger tacker
disco stu
 
Posts: 190
Joined: Fri Oct 15, 2010 4:58 am

Re: Transmitter Mode....3?

Postby pete139 » Thu Aug 04, 2011 4:19 am

Good to know there are others using mode 3... phew! :)
pete139
 
Posts: 13
Joined: Wed Jul 20, 2011 2:40 am

Re: Transmitter Mode....3?

Postby Shotglass » Thu Aug 04, 2011 6:39 pm

ergocentric wrote:One of the better IMAC fliers around here flies mode four, so I asked, he said rolling circles were much easier


by the same token though piroflips with a heli are much easier on mode 2 and 3

I fly mode two, like my instructors


like probably most of us do and theres nothing fundamentally wrong with learning whatever mode the guy teaching you uses
except maybe if you have wild 3d flying aspirations and want to make sure from the start that you have the "ideal" mode for 3d with either planes or helis
Shotglass
 
Posts: 106
Joined: Mon Jun 27, 2011 5:52 pm

Re: Transmitter Mode....3?

Postby ergocentric » Thu Aug 04, 2011 8:34 pm

Just to make sure we are all on the same page, mode 1 and 3 are throttle right, mode 2 and 4 are throttle left, the the difference lies in if the aileron or rudder is with the elevator.

since I'm right handed I like the elevator on the right edit: and the importance of modes is the pre-defined mixes like throttle cut and dual rates otherwise just move the servos and ratchet
Attachments
tx mode.png
tx mode.png (5.84 KiB) Viewed 1171 times
unconcerned but not indifferent - MAN RAY
User avatar
ergocentric
 
Posts: 350
Joined: Sat Jun 05, 2010 9:45 pm
Location: small town, Ontario, Canada

Previous

Return to For Beginners (if you're just getting started in RC)

Who is online

Users browsing this forum: No registered users and 1 guest

cron