Keith wrote:I thought it was my ribbon cable at first... There is no way to hold the cable in while you push down the two end pieces... When I closed the case I thought something may have pushed to hard on it... But it can't be that as it worked for about five minutes, and now I get the splash screen for a split second before it goes black (not blank)....
Hi Keith,
If the screen shows the splash screen for a moment and it had worked for five minutes previously it is possible that you need to re flash the software, the Atmel processor eprom may have not been programmed sufficiently over the threshold it needed to retain the program.
Otherwise the processor may be a dud but the display either works or it doesn't the indication is that the processor runs to a certain point and then jumps out of program.