Hi folks....
I have one of those new AXN EP airplanes that Bruce is flying all over the place on the XJET video channel. I should mention here that it wasn't real cheap getting it shipped to here in the U.S. So if you decide to buy one of these from HK be aware of this.
The flying surfaces are very poorly hinged....so be prepared to cut all of them loose with a hobby knife and use blenderm or the klet (dubro) style hinges. You will be much happier reducing the load off your little HXT-900 servos.
Here's where I need some help.....the wings are reinforced with a CF tube that lays in a trough in the wing. I have chosen to permanently attach the wings....It's a small model.....so taking the wings apart for transport to the flying field isn't necessary. I need to know what kind of glue to use on this new EPO foam. What does the best job??? When the AXN is experiencing positive G's.....the CF tube will be trying to break away from the wing and apply pressure to the trough cover. If it comes loose from the wing....the trough cover is likely to give way resulting in folded wings & disaster !
So if you have experience in this area.....I am open to suggestions....
Flash