Yesterday i connected as usual my Fpv System from Foxtechfpv. I am using a 500mW 5.8Ghz Tx and RX. As i connected it the Led went on but there was no picture and suddenly something just popped.
On the attached Pics you can see what was damaged.
My Question is, can i repair this or can i replace that Module that i have marked.
The other thing is that when i hook it up to my 3S 850mAh Lipo the led goes on and the fan starts running, but i do not receive a picture. On the video goggles the Picture turns to black as if it would receive a signal but there is no pic. i checked already the camera but i can see anything damaged or what so ever.
Hopefully you guys can help me, cause i am leaving for 4 Month up in the Mountain and i wanted to make some vids up there.
Looks like the voltage regulator they usually go up in smoke because of reverse polarity. I suppose if you find a new one of those components it might work. Im sure someone here could tell you what it is.
I also have exactly the same problem. Obviously I have touched + wire with signal wire while tasting the cam and it burned lil thingy exactly in same location as shown before. I was wondering if its still fixable or should I invest into new unit. Help app reacted, thank you