Charge Plug for LiFe Tx Battery

Here's an area where you can ask any kind of question about RC models and find a whole lot of useful information to help you get started.

Charge Plug for LiFe Tx Battery

Postby GRM » Tue Dec 13, 2011 4:14 am

Hi,

I bought a couple of these batteries http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=17955 for my Turnigy 9x and replaced the small white charge/discharge plug with a JST-XH connector on each.

Now I need to make a charge lead to be able to connect the battery to my icharger. So I was going to use a female version of the large black connector to make a charge lead. What's the connector called and can I get a female version ?

Any help appreciated,

Geoff
GRM
 
Posts: 45
Joined: Sat Oct 22, 2011 10:23 pm

Re: Charge Plug for LiFe Tx Battery

Postby quarry44 » Tue Dec 13, 2011 7:37 pm

Futaba calls it a "J"type plug,but it's pretty much a standard connector these days.I buy a few extension cords,and cut them in half.That gives me a few spare male plugs for other battery packs.
http://www.hobbyking.com/hobbyking/stor ... duct=10412.
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am

Re: Charge Plug for LiFe Tx Battery

Postby GRM » Tue Dec 13, 2011 8:41 pm

Thanks for the info - appreciated.

Geoff
GRM
 
Posts: 45
Joined: Sat Oct 22, 2011 10:23 pm


Return to For Beginners (if you're just getting started in RC)

Who is online

Users browsing this forum: No registered users and 1 guest

cron