Good starting point: Radd's school of rotary flight

Are you learning to fly a heli? Get some tips here. Experts can offer advice

Good starting point: Radd's school of rotary flight

Postby takilara » Thu May 20, 2010 10:44 pm

I've found that Radd's school of rotary flight: http://www.dream-models.com/eco/flying-index.html
is a good place to start. (kindof a series of steps that teaches you to hover, and then to fly.. quite probably saving you a lot of cash in parts as well..)

(actually I didn't start there myself, but started following his steps to build confidence as i felt i didn't have enough confidence when doing FF)
The price of getting what you want;
is getting what you once wanted...
_____
T-REX 600 ESP
CopterX 450AE V2
Multiplex FunCub
Belt-CP
User avatar
takilara
 
Posts: 144
Joined: Mon May 17, 2010 7:53 am
Location: Stavanger - Norway

Re: Good starting point: Radd's school of rotary flight

Postby jomarx » Fri May 21, 2010 6:21 am

COOL! and it looks good so far. Thanks for the link! I also wanted to learn how to fly helis...
User avatar
jomarx
 
Posts: 43
Joined: Tue May 04, 2010 9:19 am

Re: Good starting point: Radd's school of rotary flight

Postby takilara » Fri May 21, 2010 7:37 pm

You can get along way without any form of training, however that requires insane patience. Following Radd's will "force" you to be patient :)

(the biggest temptation when learning to fly helicopters, is to start to fly when you are still learning to hover, and that is often expensive, at least it was for me ... :)
The price of getting what you want;
is getting what you once wanted...
_____
T-REX 600 ESP
CopterX 450AE V2
Multiplex FunCub
Belt-CP
User avatar
takilara
 
Posts: 144
Joined: Mon May 17, 2010 7:53 am
Location: Stavanger - Norway

Re: Good starting point: Radd's school of rotary flight

Postby Ampair » Sat May 07, 2011 10:55 pm

Radd has lowered the parts sales of some hobby sellers dramatically. Unfair trade practice :D
User avatar
Ampair
 
Posts: 53
Joined: Tue May 04, 2010 9:48 pm
Location: North Shore, Auckland, New Zealand

Re: Good starting point: Radd's school of rotary flight

Postby westy » Wed Mar 14, 2012 9:37 am

I totally agree with the Radd Concept ....

It really works. For me I was in my garage during high wind conditions and shut the door ...

Drew a 300mm square with heavy chalk. on the floor....

and repeated Radds methods .... over and over and over again .... and then some more.


in Less than 3 hours..... I was hovering and staying within a 600 mm radius of the square for many .... many minutes at a time .... lost and lots of practice and concentration was needed. and when I went out of my mental square, I landed and set up again and again until I trained my mind to focus.

The reward (and smile that comes from ear to ear thinking about it....)

Is well worth the pain and suffering of many crashes and spare parts I have had to replace over the year I have been flying Heli.... was getting nowhere fast....

but now I have the control and feel for my magic flying machine!! :mrgreen:
westy
 
Posts: 15
Joined: Fri Nov 25, 2011 8:56 am

Re: Good starting point: Radd's school of rotary flight

Postby cynr100 » Wed Mar 14, 2012 10:11 am

Congrats Westy, the enjoyment and satisfactions 99%, the other 1% is for the spectators.

I am coping so much flak at work, I hangar crashed my 450 resulting in an ambo ride and 10 stitches now I have crashed ( water landed) my AXN into a tank.

I take satisfaction in that spectators do not understand.
Not enough time in the day for all my crazy ideas, I'm not slow, I'm just pacing myself
User avatar
cynr100
 
Posts: 821
Joined: Wed Jan 25, 2012 7:37 am
Location: Cairns, Australia

Re: Good starting point: Radd's school of rotary flight

Postby Hal9000 » Sun Jul 15, 2012 12:03 am

As some one reigniting the RC desire I have been looking all over the Internet at the ton and tons of information that is out there. A big difference from 20-30 years ago when the only source of information was word of mouth, clubs and expensive imported magazines.

As far as learning to fly Helis I was impressed at RC-help.com's series of YouTube videos. His site has them all listed here.

Once I have mastered my "on it way from HK" AXN flyer I may look at helicopters. But that is while aways and I'll need to save some dosh too.
Hal9000
 
Posts: 73
Joined: Sun Jul 01, 2012 2:44 pm
Location: Auckland, New Zealand

Re: Good starting point: Radd's school of rotary flight

Postby quarry44 » Sun Jul 15, 2012 6:45 am

""I have crashed ( water landed) my AXN into a tank. "
Did the tank survive the onslaught? :mrgreen: :mrgreen:
Thanks for the link,takilara,I've been eying up HK's 450 pro for some time.One of these days........
quarry44
 
Posts: 383
Joined: Fri Aug 19, 2011 6:58 am

Re: Good starting point: Radd's school of rotary flight

Postby cynr100 » Sun Jul 15, 2012 7:49 am

quarry44 wrote:""I have crashed ( water landed) my AXN into a tank. "
Did the tank survive the onslaught? :mrgreen: :mrgreen:
Thanks for the link,takilara,I've been eying up HK's 450 pro for some time.One of these days........


I call it a tank, ground level 25m dia by 2.5m depth surrounded by a 1m rail fence and rotating bridge pivoting in the middle :shock: . I dodged everything, just a little water ingress (killed the ESC) quite proud of myself 8-) . It was the only "tank" in the entire sewage plant that didn't have poo in it :o :lol: just clean water.

Being laid up for awhile did have it's advantages, my Titan 450 is rebuilt :D

http://www.youtube.com/watch?v=naacipI2daE&feature=plcp

I have been looking at the HK450s as well they appear to be the goods, I'll get this one sorted fully first or crash in the attempt thus requiring a new one anyway :lol: :lol:

Dennis
Not enough time in the day for all my crazy ideas, I'm not slow, I'm just pacing myself
User avatar
cynr100
 
Posts: 821
Joined: Wed Jan 25, 2012 7:37 am
Location: Cairns, Australia

Re: Good starting point: Radd's school of rotary flight

Postby BillGriffiths100 » Sun Jul 15, 2012 1:46 pm

Being laid up for awhile did have it's advantages


I trust all this illness isn't connected to your involvement with sewage, because that would really stink!

I trust the missus was away while you prepared to chop up her patio furniture!
Compromising with out of control government is like living with a lion, sooner or later the bloody thing will eat you .

You accept the tyranny of the state when it's not being applied to you, when it is: it's too late.
User avatar
BillGriffiths100
 
Posts: 553
Joined: Mon Sep 20, 2010 2:04 pm
Location: London UK

Next

Return to Learning to Fly

Who is online

Users browsing this forum: No registered users and 0 guests

cron