All of the products reviewed here have been bought with my own money and nobody pays me for the time I spend writing these articles.
If you find any of this stuff useful and/or would like to see RCModelReviews continue to publish material like this then please consider making a small donation towards the operation of the site.
So who's doing this reviewing then?
Well I've been building and flying or driving radio controlled models for over 40 years and during that time I like to think I've built up a reasonable amount of knowledge.
I'm also a qualified electronics engineer who has worked in radio frequency, analog, digital systems and software for more than three decades. In fact I designed and built my first RC set back in 1969.
For the past nine years I've also been involved in the design and manufacture of some rather sophisticated engine technology and UAV flight control systems.
So, chances are I've been there, done that and have a huge pile of tee shirts to prove it.
Right now I'm heavily into 3D flying and enjoy all aspects of the RC hobby. I may be old but I don't feel it.
In the Pipeline
Here's just a little bit of what's to come on this site...
RC explained: Demystifying terms such as PCM, PPM dual conversion, single conversion, full-range etc., this feature will explain it all.
Cheap Chinese Engines: Just how good are those cheap Chinese glow and gas engines that sell for half the price of their "brand-name" equivalent? I put several to the test.
Build your own radio gear?: Back in the old days, building your own RC gear was not uncommon and now the arrival of 2.4GHz has made it practical again.
China restricts export of LiPos
CHINA CUSTOMS PROHIBITS EXPORT OF LIPOS
10 June 2008
If you're one of those modellers who figured that the nitro shortage wouldn't affect you because you fly electric then think again.
RC Model Reviews has heard that Chinese Customs Officials are now refusing to allow the export of lithium polymer batteries (LiPos) by airfreight or airmail until after the Olympics later this year.
This tip-off appears to be supported by notices appearing on Chinese model retail websites such as this one.
Citing security concerns, Customs are refusing to allow a range of potentially dangerous products to be carried by air.
While some Chinese-based companies may be prepared to ship such items through the use of false declarations, there's always the risk that your order will be confiscated if it is examined by officials prior to leaving the country.
I'll be trying to get more information on this situation but it would appear that, just like nitro, supplies of cheap LiPos may be off the table until later in the year.
If you found this information useful then please consider making a small donation towards the operation of this website.
Updated: 20 Sep 2012
Here's a blog that will keep you informed just what's going on behind the scenes at RC Model Reviews and also tells you a little more about myself.
23 Mar 2010
How come there's no compatibility between different brands of transmitters and receivers? Why can't you use a cheap Chinese receiver with your Futaba FASST radio?
4 Mar 2010
Since this has become a very frequently asked question, I've posted this simple guide to getting your product, or a product you're thinking of buying reviewed here at RCModelReviews
Useful information on what's inside your servos and how they work.
Important facts you should know about the oils that are used in our model engine fuels.
How well do five different 2.4GHz systems stack up when hit by interference? The answers are here, with more to come.
Yes it does work on model airplanes but there are some limitations involved with this bargain-basement radar speed gun.
These are possibly the world's worst servos, find out exactly why you should avoid these boat-anchors at any cost.
It's cheap but can it really stack up against other glow engines in the .90 market? Find out in this review.
How does this cheap 9-channel 2.4GHz radio system perform when compared to big-name systems that can cost two or three times as much? Have the Chinese finally developed a real contender with the iMax 9X?
Does all this 2.4GHz stuff have your head spinning?
I've done my best to demystify the whole subject so if you feel like a bit of learning, this is the stuff for you!
How can you tell when your engine needs new bearings? Who has the best prices and service on replacements? Just how do you change them? Get all that information and watch a great video tutorial anyone can follow.
The Chinese are now churning out a huge number of very reasonably priced no-name servos. But are they any good?
Nicad, NiMH, Li-Ion, LiPoly, LiFePO4, A123... the range of different battery types has never been greater. So how do they differ and what type should you be using?